SD388-4AR – 4-wire photoelectric smoke detector with relay output

Description

Product description

SD388-4AR · Sentek

4-wire photoelectric smoke detector with NC/NO relay output and auto reset, for 12 or 24 V DC, to EN 54-7.

The SD388-4AR is a conventional photoelectric smoke detector for alarm or fire panel zones. It uses 4 wires: 2 for the 12 or 24 V DC supply and 2 for the relay contact, which is set to NC or NO by jumper.

With auto reset, the detector returns to standby by itself once the smoke clears, in under 1 s, with no need to cut the power. The LED flashes every 1–3 s in standby and stays steady red in alarm.

Start-up time is up to 30 s. The relay contact is rated 1 A / 30 V DC or 0.5 A / 125 V AC. The detector is 102 mm in diameter and 43 mm high with its base.

STANDARD FUNCTIONS
1Photoelectric sensing. With advanced detection algorithms.
2NC/NO relay output. Set by jumper, 1 A / 30 V DC.
3Auto reset. Returns to standby by itself after an alarm.
4Status LED. Flashes in standby, steady in alarm.
512 or 24 V DC. Powered from an alarm or fire panel.

Technical specifications

SD388-4AR

DETECTION
DetectionSmoke, photoelectric element
Sensitivity0.08–0.14 dB/m (EN)
ProcessingAdvanced detection algorithms
OUTPUTS AND INDICATIONS
Wiring4-wire, relay output
Contact modeNC/NO by jumper
Relay rating1 A / 30 V DC, 0.5 A / 125 V AC
ResetAutomatic, under 1 s
LEDFlashes every 1–3 s in standby, steady red in alarm
POWER
Supply voltage12/24 V DC
Standby current40 µA
Alarm current30/40 mA (12/24 V)
Start-up timeUp to 30 s
ENVIRONMENT AND MECHANICAL
Operating temperature−10 to +50 °C
Humidity0–95 % RH, non-condensing
DimensionsØ102 × 43 mm with base
Weight135 g with base
CERTIFICATION
StandardsEN 54-7, UL 268

Documents

1 PDF file · English

TypeTITLELANGUAGEFORMATOpen
PDFDatasheetSD388-4AR - Datasheet EN.pdfEnglishPDF · 0.4 MBDownload the file Datasheet