CM707 – 8-zone expansion board for the CM705 multi-expansion

Description

Product description

CM707 · Digiflex

Plug-on board that adds 8 wired zones to the CM705P multi-expander, bringing it to 16 wired zones.

The CM707 fits the expansion port of the CM705P multi-expander, not the panel itself, and is powered by it. It adds 8 physical zone inputs, so the multi-expander gives 16 wired zones with single EOL or alarm plus tamper; it is not used with zone doubling (split EOL), because the CM705P then already has 16 inputs.

It comes with 3K3 and 6K8 EOL resistors and three plastic standoffs. With the panel and the CM705P powered down, fit the standoffs to the board, plug it onto the EXPANSION PORT and power up again. The status LED flashes while the board is communicating with the panel and stays on steady when it is not. An earthing point allows connection to a communications earth for better lightning protection.

STANDARD FUNCTIONS
1+8 zones. Brings the CM705P to 16 wired zones.
2Plug-on. Fits the CM705P multi-expander only.
3Zone wiring. Single EOL or alarm + tamper (no zone doubling).
4Status indicator. LED showing whether the board is communicating with the panel.
5Complete set. With 3K3 and 6K8 EOL resistors and 3 plastic standoffs.

Technical specifications

CM707

GENERAL
Zones+8, single EOL or alarm + tamper (no doubling)
MountingPlug-on to the CM705P multi-expander only (not to a panel)
Total with CM705P16 wired zones
PowerFrom the CM705P multi-expander
IndicatorStatus LED: flashing = communicating, steady = no communication
EarthingPoint for connection to a communications earth
CONTENTS AND MECHANICAL
Included3K3 and 6K8 EOL resistors, 3 plastic standoffs
Dimensions93 × 52 × 25 mm

Documents

1 PDF file · English

TypeTITLELANGUAGEFORMATOpen
PDFInstallation manualCM707 - Installation manual EN.pdfEnglishPDF · 0.7 MBDownload the file Installation manual