CM710 – 4 relay output expansion (2 A / 24 V DC)

Description

Product description

CM710 · Digiflex

Expansion board with 4 relay outputs (2 A / 24 V DC) for Digiflex Vision control panels, connected to the panel's RS485 bus.

The CM710 adds 4 programmable Form C relay outputs to the control panel, with NO, NC and COM contacts, for LED indicators, garage doors, lighting, pumps, air conditioning or door strikes in access control applications. Each output's function and operating time are programmed from the panel. The board connects to the 4-wire RS485 bus and can be mounted away from the panel: up to 300 m with standard alarm cable or up to 1,200 m with Belden 8723 shielded two-pair twisted cable. It is fully supervised by the panel.

The address is set with a 4-way DIP switch; all boards leave the factory at address 1. No enabling is needed in programming: the panel recognises the board after a power cycle or a bus scan (MENU 6-0-2). To test the wiring, each output can be operated from its own test button on the board, without a keypad, and LEDs show the status of the module and of each output. There is a service keypad connector and a tamper input; if it is not used, fit the supplied jumper.

STANDARD FUNCTIONS
14 relay outputs. Form C (NO/NC/COM), 2 A @ 24 V DC each.
2Remote mounting. On the RS485 bus, up to 1,200 m with Belden 8723.
3Test buttons. One per output, to check wiring without a keypad.
4LED indicators. Module and individual output status.
5Service keypad and tamper. Dedicated connector and tamper input.
6Up to 8 boards. On Vision-X, Vision-XIP and MyAlarm-XIP.

Technical specifications

CM710

OUTPUTS
Number4 relays, Form C (NO/NC/COM)
Contact rating2 A @ 24 V DC
ProgrammingFunction and operating time from the panel
CONNECTION
Bus4-wire RS485, fully supervised
Maximum length300 m with alarm cable, 1,200 m with Belden 8723
Address4-way DIP switch (factory setting 1)
RecognitionPower cycle or bus scan (MENU 6-0-2)
ELECTRICAL
Operating voltage10.0–14.5 V DC
Consumption30 mA, up to 200 mA with all relays and LEDs on
INPUTS AND INDICATORS
InputsCabinet tamper, output test buttons
ConnectorsService keypad
IndicatorsModule and output status LEDs
COMPATIBILITY
Vision-X, Vision-XIP, MyAlarm-XIPUp to 8 boards
Vision-ICON1 board
Vision-GRAPHICUp to 16 boards
ENVIRONMENT AND MECHANICAL
Operating temperature−30 to +55 °C
Humidity5–85% at 30 °C, non-condensing
Dimensions (W × D × H)115 × 86 × 30 mm

Documents

3 PDF files · English and Greek

TypeTITLELANGUAGEFORMATOpen
PDFInstallation manualCM710 - Installation manual EN.pdfEnglishPDF · 3.9 MBDownload the file Installation manual
PDFDatasheetCM710 - Datasheet EN.pdfEnglishPDF · 1.5 MBDownload the file Datasheet
PDFDatasheetCM710 - Datasheet GR.pdfGreekPDF · 0.6 MBDownload the file Datasheet