PR115 – Outdoor Smart Card reader (black)

Description

Product description

PR115 · Digiflex

Outdoor smart card reader for the RS485 bus of Vision, MyAlarm and TITAN panels, rated IP66, with encrypted communication and control of a partition, a door or both.

The PR115 connects to the panel's encrypted RS485 bus and takes up one keypad position; set its address with the rotary switch (factory set to 1), then power cycle the panel or scan the bus. Card communication is encrypted with two-way authentication, and it accepts PR301 (key fob), PR350 (ISO card) and PR365 (sticker) credentials. The housing is UV-stabilised ASA plastic, vandal resistant and rated IP66 for outdoor installation.

As a partition reader it arms fully or in part and disarms, according to the permissions you set in the panel. As a door reader it drives the lock with its 500 mA open-collector output, always through a relay with a protection diode, and takes an exit button on the EGRESS input. When the reader is on an outside wall, it is best to drive the lock from a panel or output-expander output rather than the reader's own output.

With no display, status is shown by three indicators: red and green for the partition, blue for the door. The buzzer signals alarm, fire, trouble, entry/exit times and chime; the volume is fixed, but it can be switched off in programming. The PR116 is the same model in white.

STANDARD FUNCTIONS
1Outdoor use. IP66, vandal-resistant ASA plastic, −30 to +55 °C.
2Encryption. Two-way authenticated reading and encrypted RS485 bus.
3Partition or door. Arm/disarm, door control, or both.
4Door control. 500 mA lock output and exit button input.
5Indicators. Red, green and blue indicators plus buzzer.
6Tamper. Tamper protection.

Technical specifications

PR115

READING
TechnologySmart Card MiFare, 40-bit proprietary format, 13.56 MHz, ISO 14443A
SecurityEncrypted, two-way authentication
Read rangeUp to 40 mm
CredentialsPR301 key fob, PR350 ISO card, PR365 sticker
FUNCTIONS
ManagesPartition, door or both
PartitionFull arm, part arm, disarm (per permission)
Lock outputProtected open collector, 500 mA (via relay with diode)
EGRESS inputLow to trigger, can be disabled in programming
IndicatorsRed/green (partition), blue (door), buzzer
BuzzerFixed volume, can be switched off in programming
TamperYes
ELECTRICAL AND BUS
Operating voltage10–14.5 V DC
Current drawUp to 100 mA
BusRS485, encrypted, keypad position
Bus lengthUp to 500 m with multi-strand alarm cable, up to 1,200 m with 2-pair shielded cable (Belden 8723)
AddressRotary switch, factory set to 1
COMPATIBILITY
PanelsVision-X, Vision-XIP, MyAlarm-XIP, MyAlarm 816, TITAN
QuantityUp to 16 keypads/readers on Vision-X (firmware 2.10 or later)
ENVIRONMENT AND MECHANICAL
Ingress protectionIP66
MaterialUV-stabilised ASA plastic, vandal resistant
Operating temperature−30 to +55 °C
Humidity5–85% at 30 °C, non-condensing
Dimensions (W × D × H)44 × 21 × 114 mm
ColourBlack
IncludedBase, cover, mounting template, instructions, M3 × 6 mm screw and 2 mm hex key

Documents

2 PDF files · English

TypeTITLELANGUAGEFORMATOpen
PDFInstallation manualPR115 - Installation manual EN.pdfEnglishPDF · 3.4 MBDownload the file Installation manual
PDFBrochurePR115 - Brochure EN.pdfEnglishPDF · 1.3 MBDownload the file Brochure