AS-300 – Self-powered outdoor siren with flash

Description

Product description

AS-300 · Hongchang

Self-powered 128 dB outdoor siren with flash and backup battery, positive or negative trigger and a separate flash-only input.

It is triggered by a positive voltage on the GO+ terminal or a negative command on GO−, and then the sounder and the flash work together. A separate FL− input lights only the flash for as long as the negative command lasts, for example to show arming and disarming.

A jumper sets the run time: in FT it sounds only on the panel's command and for as long as it lasts; in TMR, the recommended setting, it also sounds when the supply from the panel is lost (for example a cut cable), for 3 minutes or until power returns. A second jumper makes the flash stay lit (LMP) or flash (FL).

It takes a 12 V rechargeable lead-acid battery of up to 1.3 Ah, charges it at up to 250 mA and switches itself off when the battery falls below 8 V, so the battery is never fully discharged. The double housing has a 3 mm ABS outer shell with UV protection and a 0.8 mm metal inner cover, and the tamper raises an alarm if the cover is unscrewed or the siren is pulled off the wall.

STANDARD FUNCTIONS
1Positive or negative trigger. Triggered from GO+ or GO−, with a separate negative FL− input for the flash only.
2Selectable run time. FT: for as long as the panel command lasts. TMR: also on loss of supply, for 3 minutes.
3Flash mode. Steady (LMP) or flashing (FL) in alarm.
4Backup battery. Lead-acid 12 V up to 1.3 Ah, protected against deep discharge below 8 V.
5Tamper. N/C contact that opens when the cover is unscrewed or the siren is pulled off the wall.

Technical specifications

AS-300

SOUND AND FLASH
Sound level128 dB
Fundamental frequency1,850 Hz
Frequency range1,300–2,400 Hz
ToneModulated (yelp), continuous
FlashLamp 12 V DC / 5 W, steady (LMP) or flashing (FL)
INPUTS AND OPERATION
TriggerPositive GO+ (min. 9 V DC) or negative GO− (max. 1 V DC)
Flash inputFL−, negative command, flash only
Input impedance1 kΩ
Run timeFT: as long as the command · TMR: 3 minutes
Loss of supplyAlarm for 3 minutes or until power returns (TMR only)
TamperN/C, 28 V DC / 0.1 A, cover opening and wall removal
POWER
Supply voltage13.6–14.2 V DC from the panel
Stand-by current8 mA
Alarm current1.6 A at 13.8 V DC
Maximum power50 W (peak)
BatteryRechargeable lead-acid 12 V, up to 1.3 Ah
Charging currentUp to 250 mA
Battery protectionCut-off below 8 V DC (±0.3 V)
MECHANICAL
Housing3 mm ABS outer shell with UV protection, 0.8 mm metal inner cover
ProtectionSplash resistant, conformal-coated circuit board
Dimensions270 × 193 × 100 mm
Weight1.85 kg without battery
Operating temperature−30 to +60 °C

Documents

3 PDF files · English and Greek

TypeTITLELANGUAGEFORMATOpen
PDFManualAS-300 - Manual EN.pdfEnglishPDF · 0.4 MBDownload the file Manual
PDFManualAS-300 - Manual GR.pdfGreekPDF · 0.6 MBDownload the file Manual
PDFManual (2)AS-300 - Manual GR (2).pdfGreekPDF · 0.6 MBDownload the file Manual (2)