AMC-SMILE 18 – Smile 18 PIR motion detector

Description

Product description

AMC-SMILE 18 · AMC

Dual-element PIR motion detector with 15 m and 90° coverage, 29 beams on 5 levels, creep-zone protection and a disable input from the panel.

The Smile 18 is a passive infrared (PIR) detector with a dual-element pyroelectric sensor and signal processing, giving 15 m coverage over 90°. The lens has 29 beams on 5 levels, 5 of which cover the area below the detector (creep zone), so nobody can approach from underneath undetected.

It opens and closes without screws: press the button at the bottom, open the cover and lift the board out of its clips. It is fixed to the wall through the knock-outs or on the optional AMC-SN1 swivel bracket, at a recommended height of 2 m. The cable runs through the channel at the back.

The walk-test LED is disabled with a jumper. With the B/S input the panel can disable the whole detector, LED included, while the system is disarmed (13.8 V on B/S, or an open-collector output through a 1 kΩ resistor). The alarm contact is N/C and the detector has an opening tamper.

STANDARD FUNCTIONS
1Creep zone. 5 beams for the area below the detector (anti-crawl).
2Dual element. 2-element pyroelectric sensor with signal processing.
3B/S input. Disables the detector and LED from the panel when disarmed.
4Walk-test LED. Disabled with a jumper.
5Screwless. Housing and board held by clips.
6Tamper. Opening protection.

Technical specifications

AMC-SMILE 18

DETECTION
TechnologyPassive infrared (PIR), 2-element pyroelectric
Coverage15 m
Angle90°
LensVolumetric Fresnel, 29 beams on 5 levels
Creep zoneYes (anti-crawl)
Alarm time4 s
OUTPUTS AND INPUTS
Alarm contactN/C, 0.2 A / 24 V DC
TamperOpening, N/C, max. 40 mA / 30 V DC
B/S inputDisables detector and LED
LEDWalk test, disabled with jumper
POWER
Supply voltage9–15 V DC
Stand-by current9.5 mA (at 13.8 V DC)
Alarm current18 mA (at 13.8 V DC)
MECHANICAL AND ENVIRONMENT
HousingABS, white, screwless
Mounting height2 m (recommended)
BracketOptional AMC-SN1 swivel bracket (not covered by IMQ approval)
Dimensions110 × 60 × 46 mm
Operating temperature−10 to +55 °C
Storage temperature−20 to +60 °C
RFI protection10 V/m (20–2,000 MHz)
CERTIFICATION
StandardEN 50131-2-2 Grade 2, Class 2
ManufacturerAMC (Italy)

Documents

4 PDF files · English and Italian

TypeTITLELANGUAGEFORMATOpen
PDFManualAMC-SMILE-18 - Manual EN.pdfEnglishPDF · 0.5 MBDownload the file Manual
PDFDatasheetAMC-SMILE-18 - Datasheet.pdf—PDF · 0.2 MBDownload the file Datasheet
PDFCatalogueAMC-SMILE-18 - Catalogue EN.pdfEnglishPDF · 2.7 MBDownload the file Catalogue
PDFInstallation manualAMC-SMILE-18 - Installation manual IT.pdfItalianPDF · 0.1 MBDownload the file Installation manual