Description
Indoor dual-technology volumetric detector, PIR and microwave, with microwave antimask, AND or BLIND modes and 15 m × 90° coverage.
| Technology | PIR and microwave, synchronisable |
|---|---|
| Coverage | 15 m × 90°, height 2.1 m |
| Detection modes | AND or BLIND |
| Antimask | Microwave, self-calibrating |
| Supply | 12 V DC ±30%, max. 40 mA |
| Certification | EN 50131-2-4 Grade 2, Class II |
Product description
Sniper-W · De Tech
Indoor dual-technology volumetric detector, PIR and microwave, with microwave antimask, AND or BLIND modes and 15 m × 90° coverage.
The De Tech Sniper-W is an indoor dual-technology volumetric detector that combines a passive infrared (PIR) sensor and microwave. It mounts at 2.1 m on a wall, in a corner or on the supplied articulated bracket, and covers 15 m with a 90° angle. A trimmer sets the microwave range from 4 to 15 m.
In AND mode it alarms when both technologies detect almost simultaneously, for areas with unstable environmental conditions. In BLIND mode it also alarms after 6 microwave detections without a PIR detection, for areas with blind spots or a risk of PIR sabotage.
The microwave antimask calibrates itself when enabled and signals the panel through the MASK output. With the COMMANDER card, detectors in the same area synchronise their microwave so they do not interfere. With the SET input connected, the microwave switches off while the system is disarmed and the first alarm is shown at disarming.
| 1 | AND mode. Alarm on simultaneous PIR and microwave detection. |
|---|---|
| 2 | BLIND mode. Also alarms after 6 microwave detections without PIR. |
| 3 | Antimask. Microwave, self-calibrating, with a MASK output. |
| 4 | Microwave synchronisation. Three frequencies, via the COMMANDER card. |
| 5 | Alarm memory. The first alarm is shown at disarming (SET input). |
| 6 | End-of-line resistors. Selectable, for DEOL or TEOL. |
Technical specifications
Sniper-W
| DETECTION | |
|---|---|
| Technology | PIR and microwave |
| Coverage | 15 m × 90° at 2.1 m height |
| Microwave | Microstrip, 8 dBm, 10.525 / 10.515 / 10.535 GHz |
| Microwave range | 4–15 m, set by trimmer |
| Modes | AND / BLIND |
| OUTPUTS AND INPUTS | |
| Alarm | NC solid-state relay, 100 mA / 24 V |
| Alarm time | 3 s |
| Antimask | MASK output |
| Cover tamper | NC, 100 mA / 30 V |
| SET input | System status (+12 V = disarmed) |
| End-of-line resistors | DEOL / TEOL |
| POWER | |
| Supply voltage | 12 V DC ±30% |
| Current | Max. 40 mA; 30 mA standby |
| CERTIFICATION AND ENVIRONMENT | |
| Certification | EN 50131-2-4 Grade 2, Class II |
| RFI immunity | 3 V/m (0.1–500 MHz) |
| Operating temperature | −10 to +55 °C |
| Relative humidity | Up to 95% |
| MTBF (theoretical) | 98,803 h |
Documents
1 PDF file · English
| Type | TITLE | LANGUAGE | FORMAT | Open |
|---|---|---|---|---|
| ManualSniper-W - Manual EN.pdf | English | PDF · 3.3 MB | Download the file Manual |