Sniper-Pet – Pet-immune dual-technology volumetric detector

Description

Product description

Sniper-Pet · De Tech

Dual-technology volumetric detector, PIR and microwave, with a PET mode for areas with pets, self-calibrating antimask and 15 m × 90° coverage.

The De Tech Sniper-Pet is an indoor dual-technology volumetric detector that combines a passive infrared (PIR) sensor with a 22-beam Fresnel lens and microwave. From a height of 2.1 m it covers 15 m with a 90° angle. It mounts on a wall, in a corner or on its articulated bracket, which adjusts 90° horizontally and 30° vertically.

It has two detection modes. In PET mode it alarms only when both technologies detect almost simultaneously, for areas with dogs and cats. In BLIND mode it also alarms after 6 microwave detections without a PIR detection, for areas with blind spots or a risk of PIR sabotage. Sensitivity can be set to one of two levels.

The microwave antimask calibrates itself when enabled and signals the panel through a separate MASK output; it is IMQ certified in BLIND mode only. With the COMMANDER card, up to 12 detectors in the same area synchronise their microwave so they do not interfere, and the LEDs can be enabled remotely for the walk test. It has 16 selectable end-of-line resistors for EOL, DEOL or TEOL wiring.

STANDARD FUNCTIONS
1PET mode. Alarm only on simultaneous PIR and microwave detection.
2BLIND mode. Also alarms after 6 microwave detections without PIR.
3Antimask. Microwave, self-calibrating, with a MASK output.
4Microwave synchronisation. Up to 12 detectors with the COMMANDER card.
5Alarm memory. The first alarm is shown at disarming (SET input).
6End-of-line resistors. 16 values, for EOL, DEOL or TEOL.

Technical specifications

Sniper-Pet

DETECTION
TechnologyPIR and microwave
LensFresnel, 22 beams on 1 plane
Coverage15 m × 90° at 2.1 m height
MicrowavePulsed microstrip, 8 dBm, 10.525 / 10.515 / 10.535 GHz
ModesPET (AND) / BLIND
SensitivityLow / high (DIP)
Microwave range4–15 m, set by trimmer
OUTPUTS AND INPUTS
AlarmNC solid-state relay, 100 mA / 24 V
Alarm time3 s
AntimaskMASK output, NC
Cover tamperNC, 100 mA / 30 V
SET inputSystem status (+12 V = disarmed)
End-of-line resistors16 values, EOL / DEOL / TEOL
POWER
Supply voltage12 V DC ±30%
CurrentMax. 40 mA; 30 mA standby
INSTALLATION
Mounting height2.1 m
MountingWall, corner or articulated bracket
Articulated bracket90° horizontal, 30° vertical
CERTIFICATION AND ENVIRONMENT
CertificationEN 50131-2-4 Grade 2, Class II
IMQAntimask certified in BLIND mode only
RFI immunity3 V/m (0.1–500 MHz)
Operating temperature−10 to +55 °C
Relative humidityUp to 95%
MTBF (theoretical)98,803 h

Documents

1 PDF file · English

TypeTITLELANGUAGEFORMATOpen
PDFManualSniper-Pet - Manual EN.pdfEnglishPDF · 0.7 MBDownload the file Manual