CM748 – 4G LTE CAT 1 module

Description

Product description

CM748 · Digiflex

Plug-on 4G LTE CAT 1 module for the control panel, using a SIM card of your choice, for GPRS IP reporting to an alarm receiving centre and MyAlarm Cloud connection.

The CM748 plugs directly onto the control panel board using the supplied plastic standoffs and is powered by the panel. It uses a Quectel EG800Q-EU modem on the 4G LTE CAT 1 network and can be the primary or the backup reporting path. It needs a Mini SIM (2FF) card of your choice on a plan that includes data; in remote locations, check the carrier's coverage first.

It reports to the alarm receiving centre over GPRS IP in SIA IP, CSV IP or MyAlarm IP, connects to MyAlarm Cloud and allows local or remote VisionLink connection over IP. The quad-band magnetic-base antenna goes outside the cabinet through the knockout and is screwed to the SMA socket before powering up; try positions for the best signal before fixing it. For poor coverage, the AN110 outdoor 4G antenna with 15 m cable is available.

STANDARD FUNCTIONS
1Plug-on. Fits directly on the control panel, with plastic standoffs.
24G LTE CAT 1. As primary or backup reporting path.
3Your own SIM. Mini SIM (2FF) card with data, of your choice.
4Alarm receiving centre. Over GPRS IP: SIA IP, CSV IP or MyAlarm IP.
5MyAlarm and VisionLink. MyAlarm Cloud connection and VisionLink over IP, local or remote.
6Outdoor antenna. Optional AN110 4G antenna for poor coverage.

Technical specifications

CM748

COMMUNICATION
Network4G LTE CAT 1
ModemQuectel EG800Q-EU
SIM cardMini SIM (2FF), your choice (not included), SIM 1 slot
ARC reportingGPRS IP: SIA IP, CSV IP, MyAlarm IP
CloudMyAlarm Cloud
ProgrammingVisionLink over IP, local or remote
ANTENNA
AntennaQuad-band, omnidirectional, magnetic base, SMA connector, 3 dBi, 50 Ω
OptionalAN110 outdoor 4G antenna with 15 m RG58 cable
INSTALLATION
MountingPlug-on to the control panel, with the panel powered down
PowerFrom the panel; deduct 100 mA from the available 12 V accessory power
IncludedModule, antenna, manual, plastic standoffs
Compatible panelsVision-XIP, MyAlarm-XIP, MyAlarm 816, TITAN
ENVIRONMENT
Operating temperature0–55 °C
Humidity5–85%, non-condensing

Documents

1 PDF file · English

TypeTITLELANGUAGEFORMATOpen
PDFDatasheet (Bosch CM748B)CM748 - Datasheet EN (Bosch CM748B).pdfEnglishPDF · 1.2 MBDownload the file Datasheet (Bosch CM748B)