CP050 – Night arming keypad

Description

Product description

CP050 · Digiflex

Small keypad for bedrooms, with two buttons for one-press perimeter or part arming and disarming, and a panic alarm with both buttons together.

The CP050 arms and disarms the system in PART 1 or PART 2 mode with a single press of the matching button. In these modes only the perimeter stays armed and interior zones are excluded, so you can move freely inside at night; PART 1 zones are set by the installer and PART 2 zones by the master user. If the entry timer is running or an alarm has occurred, disarming needs a valid code at a keypad.

Holding both buttons together for at least 2 s triggers a panic alarm, whether the system is armed or not; the sirens and the built-in buzzer sound until a valid code is entered. Two indicators show area status. The panel can switch the indicators off 60 s after the last press so they do not disturb sleep; they come back on with a button press or an alarm. Indicator brightness and buzzer volume are adjusted separately.

It connects with terminal blocks to the panel's RS485 bus, up to 300 m with standard cable or 1,200 m with Belden 8723, and mounts directly on a plasterboard or plaster wall or, on solid masonry, on a standard surface-mount outlet block. Up to 8 can be connected to each Vision-X, Vision-XIP or MyAlarm-XIP panel. Available in white.

STANDARD FUNCTIONS
1One-press arming. PART 1 or PART 2: perimeter/part arming and disarming.
2Panic alarm. Both buttons pressed together for 2 s.
3Discreet indicators. Automatic switch-off 60 s after the last press.
4Settings. Indicator brightness and buzzer volume set separately.
5Up to 8 per panel. On Vision-X, Vision-XIP and MyAlarm-XIP.

Technical specifications

CP050

FUNCTIONS
ArmingPART 1 / PART 2 (perimeter/part) and disarming with the matching button
PanicBoth buttons pressed together for 2 s
Indicators2 area status LEDs, buzzer with siren tone in alarm
SettingsBrightness, volume, indicators off after 60 s
ELECTRICAL AND CONNECTION
Supply10.5–14 V DC
Current draw20 mA (up to 50 mA with all LEDs and buzzer on)
BusRS485, up to 300 m with standard cable or 1,200 m with Belden 8723
MECHANICAL AND ENVIRONMENT
Dimensions (W × H × D)75 × 120 × 18 mm
ColourWhite
Operating temperature−30 to +55 °C
Humidity5–85% at 30 °C
COMPATIBILITY
PanelsVision-X, Vision-XIP, MyAlarm-XIP
Maximum8 per panel

Documents

3 PDF files · English and Greek

TypeTITLELANGUAGEFORMATOpen
PDFInstallation manualCP050 - Installation manual EN.pdfEnglishPDF · 2.6 MBDownload the file Installation manual
PDFDatasheetCP050 - Datasheet EN.pdfEnglishPDF · 0.2 MBDownload the file Datasheet
PDFDatasheetCP050 - Datasheet GR.pdfGreekPDF · 0.4 MBDownload the file Datasheet