CM729 – Fingerprint reader (white)

Description

Product description

CM729 · Digiflex

Indoor fingerprint reader for Digiflex Vision control panels, with a 3D Pixel sensor that reads wet or dry fingers, in white.

With the CM729, users arm (full, perimeter or part) and disarm an area or open a door with their fingerprint; the reader manages an area, a door or both. The 3D Pixel sensor reads virtually any finger, wet or dry, and its hard coating resists scratches, impacts and electrostatic discharge above 15 kV. On each read the reader vibrates briefly and gives a short confirmation beep.

Fingerprints are stored in the panel and transferred automatically to every reader on the system; with VisionLink software they can be backed up or copied to another panel. Red and green indicators show area status, a blue indicator shows door status and a large blue indicator in the finger area shows when the reader is ready; the built-in buzzer gives warnings, its volume is adjustable and the LEDs can be switched off. Access events are stored in the panel log and can be reported.

It connects to the panel's RS485 bus, up to 300 m with standard cable or 1,200 m with Belden 8723, and the address is set with a rotary switch. It has a tamper switch, a 500 mA open-collector LOCK output for the lock and an EGRESS input for an exit button, which can be disabled in programming. It mounts on a C-type wall bracket.

STANDARD FUNCTIONS
13D Pixel sensor. Reads wet or dry fingers, with a hard-wearing coating.
2Arming. Full, perimeter or part arming and disarming.
3Area or door. Manages an area, a door or both.
4Door control. 500 mA LOCK output and EGRESS input for an exit button.
5Shared fingerprints. Stored in the panel and transferred to all readers automatically.
6Indicators and haptics. Area and door LEDs, buzzer, vibration on each read.

Technical specifications

CM729

READING
Sensor3D Pixel, wet or dry fingers
Sensor protectionHard coating, ESD above 15 kV
FeedbackVibration and beep on each read
LocationIndoor
FUNCTIONS
ManagesArea, door or both
ArmingFull / perimeter / part
FingerprintsStored in the panel, transferred to all readers
IndicatorsRed/green LEDs (area), blue (door), blue (reader status), buzzer
SettingsBuzzer volume, LEDs off
TamperBuilt in
CONNECTIONS
BusRS485, up to 300 m with standard cable or 1,200 m with Belden 8723
AddressRotary switch
LOCK outputProtected open collector, 500 mA
EGRESS inputTriggered by 0 V, can be disabled in programming
POWER AND ENVIRONMENT
Operating voltage10.0–14.5 V DC
Consumption100 mA
Operating temperature−30 to +55 °C
Humidity5–85% at 30 °C, non-condensing
MECHANICAL
Dimensions (W × D × H)74 × 23 × 116 mm
MountingC-type wall bracket
ColourWhite (black: CM728)
COMPATIBILITY
PanelsVision-X, Vision-XIP, MyAlarm-XIP
Readers per panelUp to 16

Documents

3 PDF files · English and Greek

TypeTITLELANGUAGEFORMATOpen
PDFInstallation manualCM729 - Installation manual EN.pdfEnglishPDF · 3.8 MBDownload the file Installation manual
PDFDatasheetCM729 - Datasheet EN.pdfEnglishPDF · 0.6 MBDownload the file Datasheet
PDFDatasheetCM729 - Datasheet GR.pdfGreekPDF · 0.8 MBDownload the file Datasheet