Description
Two-way 433 MHz SMART RF receiver with 4 relay outputs for the RS485 bus of Vision panels, with 2 transceivers and internal diversity antennas, compatible with Digiflex and Bosch wireless devices.
| Frequency | 433.42 MHz, two-way |
|---|---|
| Antennas | 2 transceivers, diversity |
| Compatibility | Digiflex SMART RF and Bosch wireless, RF110 |
| Outputs | 4 relays NO/COM/NC, 1 A / 30 V DC |
| Per panel | Up to 4 receivers |
| Supply | 10–14 V DC, up to 70 mA |
Product description
RF121 · Digiflex
Two-way 433 MHz SMART RF receiver with 4 relay outputs for the RS485 bus of Vision panels, with 2 transceivers and internal diversity antennas, compatible with Digiflex and Bosch wireless devices.
The RF121 connects to the panel's RS485 bus and talks two-way at 433.42 MHz with the wireless devices: when a device supports two-way communication, the receiver sends it an acknowledgement. It has two built-in transceivers with internal diversity antennas, and wireless devices are enrolled in the panel memory, not in the receiver.
Up to 4 receivers (RF120 and RF121 in any mix) go on the same bus, working as a network of access points to cover larger areas. It accepts Digiflex SMART RF devices and the RF110 two-way remote (up to 10 functions), as well as selected Bosch wireless devices such as PIR detectors, reed contacts and shock sensors; for these, enable Bosch compatibility mode in panel programming (MENU 6-2-0, option 8).
The 4 relay outputs (NO/COM/NC, 1 A / 30 V DC) add programmable outputs to the system, for indicators, garage doors, lighting, sprinklers, pumps, air conditioning or door strikes; they have test buttons and status indicators. The RF121 address must not clash with a CM710 or CM705 expander address. The receiver mounts indoors on a vertical surface (landscape or portrait), high up and away from metal objects, with cover and back tamper.
| 1 | Two-way. Acknowledgement to devices that support it. |
|---|---|
| 2 | Diversity. 2 transceivers with internal diversity antennas. |
| 3 | Digiflex and Bosch. SMART RF, RF110 and selected Bosch wireless. |
| 4 | Up to 4 per panel. Network of access points on the RS485 bus. |
| 5 | 4 relays. NO/COM/NC, 1 A / 30 V DC, with test buttons. |
| 6 | Tamper and indicators. Cover and back tamper, status indicators. |
Technical specifications
RF121
| RADIO | |
|---|---|
| Frequency | 433.42 MHz, two-way |
| Transceivers | 2, with internal diversity antennas |
| Compatible wireless | Digiflex SMART RF, selected Bosch (with Bosch compatibility enabled on the panel) |
| Remote | RF110 two-way |
| Device memory | In the panel, not the receiver |
| CONNECTION AND COMPATIBILITY | |
| Connection | Panel RS485 bus |
| Receivers per panel | Up to 4 (RF120/RF121 in any mix) |
| Address | DIP switches, factory set to 1; termination on switch 5 |
| Compatible panels | Vision-X (firmware 2.52 or later), Vision-XIP, MyAlarm-XIP |
| OUTPUTS | |
| Relays | 4, NO/COM/NC |
| Rating | 1 A / 30 V DC |
| Test | Test buttons and indicators per relay |
| Note | Not the same address as a CM710 or CM705 expander |
| ELECTRICAL AND MECHANICAL | |
| Operating voltage | 10–14 V DC (12 V DC nominal) |
| Current draw | Up to 70 mA |
| Tamper | Cover and back (each can be disabled) |
| Indicators | Green (communication) and red (tamper, jamming, bus loss) |
| Operating temperature | 0–49 °C, indoors |
| Dimensions (W × D × H) | 140 × 40 × 270 mm |
| Mounting | Vertical surface, landscape or portrait |
Documents
1 PDF file · English
| Type | TITLE | LANGUAGE | FORMAT | Open |
|---|---|---|---|---|
| Installation manualRF121 - Installation manual EN.pdf | English | PDF · 2.9 MB | Download the file Installation manual |