Description
Odytronics timer (Trigger Timer) with a time of up to 3.5 minutes, started by a momentary negative command and powered from 12 V DC.
| Function | Timer |
|---|---|
| Time | 0–3.5 minutes |
| Activation | Momentary negative command |
| Time setting | Linear potentiometer and 2 jumpers |
| Supply | 12 V DC |
| Dimensions | 30 × 59 mm |
Product description
PL-1004 · Odytronics
Odytronics timer (Trigger Timer) with a time of up to 3.5 minutes, started by a momentary negative command and powered from 12 V DC.
The PL-1004 (Trigger Timer) starts timing when it receives a momentary negative command (trigger), for example from a control panel output or a push button. The time goes up to 3.5 minutes.
The output is a relay with 10 A NO / NC contacts (250 V AC / 24 V DC), for electric locks, safety lighting and automation. Two LEDs show operation and timing, and wires connect to lift-type terminals.
The time is set with a linear potentiometer and 2 jumpers. The board runs on 12 V DC, is protected against reverse-polarity connection and measures 30 × 59 mm.
| 1 | Trigger start. The timer starts on a momentary negative command. |
|---|---|
| 2 | Up to 3.5 minutes. Adjustable from 0 to 3.5 minutes. |
| 3 | 10 A relay output. NO / NC contacts on lift-type terminals. |
| 4 | Time setting. Linear potentiometer and 2 jumpers. |
| 5 | Polarity protection. Protected against reverse-polarity connection of the supply. |
Technical specifications
PL-1004
| OPERATION | |
|---|---|
| Type | Timer |
| Activation | Momentary negative command |
| Time range | 0–3.5 minutes |
| OUTPUT | |
| Output | Relay NO / NC |
| Relay contacts | 10 A (250 V AC / 24 V DC) |
| Indicators | Operation and timing LEDs |
| Terminals | Lift type |
| SETTING | |
| Time setting | Linear potentiometer and 2 jumpers |
| POWER | |
| Voltage | 12 V DC |
| Protection | Reverse polarity |
| CONSTRUCTION | |
| Base | Flame-retardant PVC |
| Dimensions | 30 × 59 mm |