CC715PGR – Vision-X alarm & access control panel

Description

Product description

CC715PGR · Digiflex

Vision-X Alarm & Access Control Panel
Professional Security & Automation System

1. General Features & Architecture
1Origin & Certification: Designed and manufactured in Australia to the international quality assurance standard AS/NZS ISO9001.
2Zone Capacity: 8 base zones (16 with zone doubling), expandable to 144 (wired or wireless).
3Partitions: 8 fully independent partitions.
4Outputs: 4 Open Collector (O.C.) digital outputs and 1 relay output (NC/C/NO) on board, expandable to 37 outputs.
5User Management: Up to 990 users by PIN code (1–8 digits), wireless remote control (RF), proximity fob or biometric reader (fingerprint).
6Duress Function: A dedicated duress code can be set per user.
7Keypads & Readers: Up to 16 keypads/readers. Cable runs up to 300 m (standard cable) or up to 1,200 m (Belden 8723 shielded cable).
8LAN Communication: Advanced RS-485 LAN with CRC-based data encryption for maximum speed and security.
9Network Security: RS-485 LAN lock function that protects against unwanted loss or replacement of peripheral devices (keypads, expanders).
10LAN over IP: The RS-485 LAN can be extended/carried over an Ethernet network with the CM430S module (RS485-to-Ethernet).
2. Access Control & Smart Logic
1Door Control: Up to 16 controlled access doors (Access Control).
2Schedules: 16 independent time schedules (with 4 time periods each) for:
  • Automatic arming / disarming per partition.
  • Automatic door locking / unlocking.
  • User access rights management (days/hours).
  • Automatic output activation / deactivation.
3Macros: Up to 8 programmable rules/actions (macros) for advanced automation.
4Audible Warning: Programmable audible warning time before automatic arming.
5Partition Supervision: An inactivity signal can be sent to the Alarm Receiving Centre (ARC) if a partition stays disarmed longer than the set time.
3. User Interface & Keypad Functions
1Greek Menu: Full Greek language support on keypads and management software.
2Custom Naming: Full naming of users, zones, outputs, arming modes, partitions, keypads, card readers, communication modules and schedules.
3Built-in Proximity Reader: Keypads with a built-in proximity reader for fast arming (Full, Perimeter, Part).
4Display & Indications: Adjustable contrast, brightness and buzzer volume. Shows date/time, temperature, partition status and system icons.
5Emergency Keys: Dedicated Panic, Fire and Medical buttons.
6Quick Arming: Quick Arm and perimeter arming with a single key press.
7Keypad Assignment: A keypad can be locked to a specific partition (Home Area).
8Event Memory: Log of 2,000 events with time and date, viewable directly on the graphic keypad.
9Outdoor Peripherals: Weatherproof keypads and card readers available.
10Chime Function: Entry notification (Chime Alarm) from the keypad buzzer when a zone opens in a disarmed partition.
11Automatic Time: Automatic daylight saving time adjustment.
4. Advanced Zone Management & Technical Features
1Zone Types & Settings: 15 different zone types. Programmable end-of-line resistor value (EOL) or no-resistor operation (No EOL), per zone or globally.
2Wiring Tolerance: ±20% value tolerance on zones for smooth operation over long cable runs.
3Forced Arming: Automatic bypass of faulty zones on arming, per user and/or zone.
4False Alarm Protection: Adjustable pulse count per zone and Pre-Delay function (the time a zone must stay open before an alarm is triggered).
5N/O Contacts: Zones can be set to Normally Open (N/O) operation.
6Detector Supervision: Automatic detector inactivity check while the system is disarmed, with a notification to the ARC and an indication on the keypad.
7Entry Times: 2 independent entry delay times per partition (Delay 1 / Delay 2).
5. Electrical Protection & Reliability
1Electronic Fuses: Protection against overvoltage, overload and short circuit on the siren, RS-485 LAN, peripheral and battery lines.
2Lightning Protection: Surge protection up to 3,000 V on the control panel, zones, outputs and peripherals.
3Supervised Outputs: 4 fully protected and supervised digital outputs (D.O.) on the control panel.
4Tamper Tolerance: If a peripheral device (e.g. siren, keypad or detector) is destroyed by a cut, short circuit or high voltage, the control panel keeps working and reports the fault to the ARC.
5Smart Lock-out: Automatic smart lock-out of the siren and the dialler.
6. Communication, Reporting & Remote Control
1Communication Protocols: Supports CID, SIA, SIA+, Domestic reporting, voice calls, SMS, CSV IP and SIA IP (over Ethernet/WiFi, GPRS, GPRS/VPN).
2Multiple Receivers: Reports to 2 different receivers/receiving centres.
3Line Protection: "Call Forwarding" function against tampering with the telephone line.
4Caller Line Identification (CLI): Caller ID support for remote functions.
5Answering Machine Bypass: Protection/bypass function for uninterrupted uploading/downloading.
6Built-in Dialler: Full uploading/downloading support with the VisionLink™ software, with no extra hardware needed.
7Failed Call Handling: Failed reports can be cancelled automatically and logged in the history once all attempts are used up.
8Smart Mobile App & Cloud:
  • Ready to connect to the MyAlarm™ Internet Interface.
  • Supports the iFob Control app on iOS & Android (an Ethernet or GPRS module is required).
  • Compatible with the CM747, CM369, MY747 and MY369 communication modules for secure signal transmission (CSV IP, SIA IP) through the European MyAlarm Server with VPN support.
7. Special Functions & Wireless Technology
1Fire Detection: Full support for true fire detection zones.
2Elderly / Care Monitoring: Dedicated inactivity detection while the system is disarmed or perimeter armed, automatically sending a Medical alarm to the ARC and activating an output.
3Wireless Technology:
  • Continuous battery level and RF signal strength monitoring.
  • Wireless devices are stored directly in the panel memory (not in the receiver).
4Service Reminder: Programmable service reminder on the keypad display after a set period.

Technical specifications

CC715PGR

ZONES
Zones8, or 16 with zone doubling
Zone expansionUp to 144, wired or wireless
Zone types15
Zone tolerance±20%, for long cable runs
End-of-line resistor (EOL)Programmable value; no-EOL mode per zone or for all zones
Zone optionsPulse count, pre-delay, normally open (N/O) per zone
Entry delays2 per partition
Automatic bypassPer user or per zone
Detector supervisionZone inactivity while disarmed: signal to the receiving centre and message on the keypad
PARTITIONS AND ARMING
Partitions8, fully independent
Quick armOne key, including perimeter arming
Auto-arm warningAudible, with programmable duration
Partition supervisionInactivity signal to the receiving centre when a partition stays disarmed longer than the set time
Keypad lockPer partition
ChimeThe keypad buzzer sounds when a chime zone opens while its partition is disarmed
USERS AND ACCESS
Users990
User credentialsPIN (1–8 digits), remote control, proximity, fingerprint
Duress codePer user
Arm / disarm reportsPer user and per partition
Access control doors16
Schedules16 weekly, with 4 time periods each
Schedule useAutomatic partition arming/disarming, door lock/unlock, user access by day and time, output control
MacrosUp to 8 (rules and actions)
OUTPUTS
On-board outputs4 open-collector digital + 1 relay (NC, C, NO)
Output expansionUp to 37 in total
Output triggers75 events, 15 polarity options
Protected outputsThe 4 on-board digital outputs, supervised
Auxiliary power3 outputs with electronic fuses, for detectors, keypads and sirens
Low batteryOutputs can be disabled so reports still go out
PERIPHERALS AND BUS
Keypads / card readersUp to 16, including outdoor models
RS485 busCRC data encryption; bus lock against peripheral substitution
Bus lengthUp to 300 m with multi-core alarm cable, up to 1,200 m with Belden 8723 shielded twisted pair
Bus over EthernetWith the CM430S converter
WirelessBattery and signal checks; devices are stored in the panel memory, not the receiver
Remote controlTwo-way RF110
COMMUNICATION
DiallerBuilt-in, PSTN (RJ-12 or 4-way IN-OUT terminal block)
Receiving centre receivers2
Reporting formatsContact ID, SIA, SIA+, SIA IP, CSV IP
Other reportingDomestic reporting, SMS, voice calls with the optional CM101GR voice card
Communication modulesCM747, CM369, MY747, MY369; via the European MyAlarm Server over VPN (CSV IP, SIA IP)
MyAlarmReady; needs an Ethernet or GPRS module
AppiFob Control for iOS and Android
Caller ID (CLI)Yes
Call forwardingYes, against tampering with the telephone line
Answering machine bypassYes, for uploading/downloading
Failed reportLogged and cancelled after the retry limit
PROTECTION AND SPECIAL FUNCTIONS
Electronic fusesSiren, RS485 bus, peripherals, battery: overvoltage, overcurrent, short circuit
Surge protectionUp to 3,000 V on board, zones, outputs and peripherals
Surge damageThe system keeps working and reports the fault to the receiving centre
Smart lockSiren and communicator
Fire detectionYes
Elderly monitoringZone inactivity while disarmed or perimeter armed: medical alarm to the receiving centre and an output switches on
POWER
Input voltage16–18 V AC, 50–60 Hz, 24 VA from an external transformer, or 220–240 V AC with an internal 18 V AC, 24 VA transformer
Auxiliary currentUp to 1 A in total at rest (+12 V, bus, C+)
Total currentUp to 4 A, including peripheral power supplies
Battery12 V DC, 7.2 Ah, rechargeable
Minimum operating voltage10.2 V DC
ChargerPulsed, controlled charging
GENERAL
Event log2,000 events with date and time, readable on a graphic keypad
KeypadGreek; date, time, temperature, partition status; panic, fire and medical buttons
Custom namesUsers, zones, outputs, partitions, keypads, readers, communication modules, schedules
Programming softwareVisionLink, no extra hardware
Daylight savingAutomatic
Service reminderKeypad message after a set interval
GradeGrade 2, Class II
Operating temperature0 to +55 °C
Operating humidity5–85% RH
Board dimensions235 × 85 × 40 mm
Manufacturing standardAS/NZS ISO 9001 (Australia)
Warranty3 years from the date of manufacture
In the boxControl panel and wiring accessories

Documents

7 PDF files · English and Greek

TypeTITLELANGUAGEFORMATOpen
PDFUser manualCC715PGR - User manual EN.pdfEnglishPDF · 2.7 MBDownload the file User manual
PDFInstallation manualCC715PGR - Installation manual EN.pdfEnglishPDF · 3.1 MBDownload the file Installation manual
PDFBrochureCC715PGR - Brochure EN (2).pdfEnglishPDF · 1.9 MBDownload the file Brochure
PDFUser manualCC715PGR - User manual GR.pdfGreekPDF · 3.3 MBDownload the file User manual
PDFInstallation manualCC715PGR - Installation manual GR.pdfGreekPDF · 4.6 MBDownload the file Installation manual
PDFMenu quick referenceCC715PGR - Menu quick reference GR.pdfGreekPDF · 0.5 MBDownload the file Menu quick reference
PDFComparison tableCC715PGR - Comparison table GR.pdfGreekPDF · 0.1 MBDownload the file Comparison table