CP155WH – Outdoor keypad with smart card reader (white)

CP155WH – Outdoor keypad with smart card reader (white)
CP155WH – Outdoor keypad with smart card reader (white)

Description

Product description

CP155WH · Digiflex

IP65 outdoor keypad with a built-in 13.56 MHz smart card reader and a relay output for a door, for Vision, MyAlarm and TITAN panels, in white.

The CP155WH is a keypad for outdoor mounting, made of high-strength UV-resistant plastic and weather resistant to IP65. It has a built-in 13.56 MHz smart card reader with encrypted reading, backlit keys and front and rear tamper. It connects to the control panel's encrypted RS485 bus and takes one keypad position; the address is set with a DIP switch, which also enables bus termination when needed.

It manages an area, a door or both, and is assigned to one area only. Red and green indicators show area status and a blue indicator shows door status, while the buzzer gives audible feedback. Key combinations trigger a panic ([1] + [3]), fire ([4] + [6]) or medical ([7] + [9]) alarm.

For the door there is an isolated clean changeover relay contact rated 2 A / 24 V DC, which drives a lock or triggers a third-party device such as a gate controller, and an Egress input for an exit button. When the keypad is on an outside wall, the maker recommends controlling the lock from an output on the panel or an expander inside the protected area. The box includes a mounting plate, connection cable, one card, hex screws and an Allen key.

STANDARD FUNCTIONS
1IP65. For outdoor mounting, UV-resistant plastic.
2Smart card reader. Built in, 13.56 MHz with encryption.
3Door control. 2 A / 24 V DC relay output and Egress input for an exit button.
4Emergency keys. Panic, fire and medical alarms by key combination.
5Front and rear tamper. Protection against opening and removal.

Technical specifications

CP155WH

KEYPAD
Card reader13.56 MHz smart card, encrypted reading
Keys13, backlit
IndicatorsRed/green LEDs (area), blue (door), buzzer
CombinationsPanic [1]+[3], fire [4]+[6], medical [7]+[9]
TamperFront and rear
ManagesArea, door or both (one area only)
DOOR
Relay outputIsolated changeover contact, 2 A / 24 V DC
Egress inputFor a door exit button, can be disabled in programming
CONNECTION
BusEncrypted RS485, up to 1,200 m with Belden 8723
AddressDIP switch, with bus termination option
ELECTRICAL AND MECHANICAL
Supply10–14.5 V DC
Current drawUp to 100 mA
Ingress protectionIP65
Operating temperature−10 to +55 °C
Dimensions (W × H × D)83 × 129 × 30 mm
ColourWhite
CONTENTS AND COMPATIBILITY
IncludedKeypad and mounting plate, connection cable and grommet, 1 card, 2 M3 × 6 mm screws, 2 mm Allen key, instructions
PanelsVision-X, Vision-XIP, MyAlarm-XIP, MyAlarm 816, TITAN

Documents

1 PDF file · English

TypeTITLELANGUAGEFORMATOpen
PDFInstallation manualCP155WH - Installation manual EN.pdfEnglishPDF · 1.8 MBDownload the file Installation manual