CM747 – 4G LTE CAT 1 module

Description

Product description

CM747 · Digiflex

Plug-on 4G LTE CAT 1 module for the control panel, using a SIM card of your choice, for GPRS IP reporting to an alarm receiving centre and MyAlarm Cloud connection.

The CM747 plugs directly onto the control panel board using the supplied plastic standoffs and is powered by the panel. It uses a Quectel EG91 modem on the 4G LTE CAT 1 network, falling back to 3G where there is no 4G coverage, and can be the primary or the backup reporting path. It needs a standard-size SIM card of your choice on a plan that includes data; in remote locations, check the carrier's coverage first.

It reports to the alarm receiving centre over GPRS IP in SIA IP, CSV IP or MyAlarm IP, connects to MyAlarm Cloud and allows local or remote VisionLink connection over IP. The quad-band magnetic-base antenna goes outside the cabinet through the knockout and is screwed to the SMA socket before powering up; 7 LEDs show signal strength and connection status to help find the best antenna position. The first network registration can take up to 10 minutes.

STANDARD FUNCTIONS
1Plug-on. Fits directly on the control panel, with plastic standoffs.
24G LTE CAT 1. With 3G fallback, as primary or backup reporting path.
3Your own SIM. Standard-size SIM card with data, of your choice.
4Alarm receiving centre. Over GPRS IP: SIA IP, CSV IP or MyAlarm IP.
5MyAlarm and VisionLink. MyAlarm Cloud connection and VisionLink over IP, local or remote.
6Signal indicators. 7 LEDs for signal strength and connection status.

Technical specifications

CM747

COMMUNICATION
Network4G LTE CAT 1, 3G fallback
ModemQuectel EG91
SIM cardStandard size, your choice (not included), SIM 1 slot
ARC reportingGPRS IP: SIA IP, CSV IP, MyAlarm IP
CloudMyAlarm Cloud
ProgrammingVisionLink over IP, local or remote
ANTENNA AND INDICATORS
AntennaQuad-band, omnidirectional, magnetic base, SMA connector, 3 dBi, 50 Ω
Indicators7 LEDs (signal strength, connection)
INSTALLATION
MountingPlug-on to the control panel, with the panel powered down
PowerFrom the panel; deduct 100 mA from the available 12 V accessory power
IncludedModule, antenna, manual, plastic standoffs
Compatible panelsVision-X, Vision-XIP, MyAlarm-XIP, MyAlarm 816, TITAN
ENVIRONMENT
Operating temperature0–55 °C
Humidity5–85%, non-condensing

Documents

2 PDF files · English

TypeTITLELANGUAGEFORMATOpen
PDFManual (Bosch CM746B)CM747 - Manual EN (Bosch CM746B).pdfEnglishPDF · 2.4 MBDownload the file Manual (Bosch CM746B)
PDFDatasheet (Bosch CM746B)CM747 - Datasheet EN (Bosch CM746B).pdfEnglishPDF · 1.3 MBDownload the file Datasheet (Bosch CM746B)